one-ebike-one-etrike

Multiple options for hauling 1 eTrike + 1 eBike

1 eTrike + 1eBike

This is the Pro HD 36-70 rack with a Velotric Triker and an Engwe EP2 3.0 4 inch fat tire ebike. They will sit side by side. Another option with this rack is to fold both the eTrike and eBike.

SHOP PRO HD 36-70 Rack

1 eTrike + 1 eBike FOLDED

The SD 32-65 is our smallest rack yet you can still haul a small folding eTrike and a smaller eBike. Shown is the Lectric XP and Engwe EP2 3.0.

Shop SD 32-65 Rack

1 eTrike + 1 eBike FOLDED

The Pro HD 34-75 rack has more room for one folded etrike and 1 folded eBike.

SHOP PRO HD 34-75 RACK

Why Choose Hitch Rack Pro

Transport One Folding eTrike, and one folding ebike

There just isn't a good option to transport an etrike and an ebike at the same time. Until now. With the SD 34-65 and the PRO HD 34-75 platform hitch racks, you can carry both.

With both etrike and ebike folded, it takes two people to lift them up and set them into place. Then using our EASYRATCH ratchet straps, you can secure them to the rack. It takes two EASYRATCH straps per bike.

Pro Tip #1 - Use a lightweight cam lock strap to secure the ebike and etrike in the folded position so that it does not move. This makes picking up the ebike and etrike much easier and safer when the front half is secured to the back half.

Pro Tip #2 - Use a piece of wood or something sturdy to place under the resting bracket that sits under most ebikes and etrikes. The weight sitting on the bracket can puncture thru the wire mesh deck.

Pro Tim #3 - You can leave the ramp in the down/folded position since your not going to use it. You can set either the ebike or etrike on top of it. Or, remove two hinge bolts and you can remove the ramp completely.

One Folding etrike plus one folding ebike

Finally a better Option

You can carry one eBike and one eTrike on either of our platform racks, the SD 32-65 and Pro HD 34-75 Both eBike and eTrike must be in the folded position and loaded by lifting up and setting into place. The Pro HD 36-70 has room for unfolded ebike and etrike. Just roll them up and strap them down.

1 eTrike + 1 eBike

Not folded.

The Pro HD 36-70 can accommodate up to a full size 4 inch fat tire eBike and a smaller eTrike with 2 inch tires or less. You could opt for a fat tire eTrike but it would need to be a thin tire eBike such as 2 inches or less.

One eBike and 1 eTrike

Product list

eTrike Hitch Rack - SD 32-65

$799.00 $899.00

Sale

In Stock (47)

(Formerly called Hitch Cargo Rack Model 32-65) The Hitch Platform Carrier with ramp model SD 32-65 is perfect for hauling…(Formerly called Hitch Cargo Rack Model 32-65) The Hitch Platform Carrier with ramp model SD 32-65 is perfect for hauling cargo or electric trikes. The cargo rack is a compact, heavy-duty carrier specifically designed for small to medium-sized etrikes. Its a convenient transport solution when you need to haul your electric trike. It features an integrated folding ramp for easy roll-on loading and built-in tail lights that connect to your vehicle for added road safety. Compatible with any 2-inch receiver hitch, ideal for everyday use with SUVs, vans, trucks or sedans. Pre-orders include 2 FREE automatic retracting cargo ratchet straps with a soft protective sleeve. These new ratchet straps are easy to use and easy to remove. They include a soft sleeve to help protect painted surfaces. Also includes: Anti-wobble attachment and Locking hitch pin.

Buy Now

eTrike Hitch Rack - PRO HD 34-75

$899.00 $1,199.00

Sale

Out of Stock

More Ramp. More Confidence. The Pro HD 34-75 combines a large platform with a full-width loading ramp, giving you more…More Ramp. More Confidence. The Pro HD 34-75 combines a large platform with a full-width loading ramp, giving you more room to guide all three wheels as you roll your eTrike onto and off the rack. Designed for small, medium and large eTrikes that fit within the rack's size and weight limits, the Pro HD 34-75 provides a convenient way to take your eTrike beyond your neighborhood and explore more places. Full-Width Loading The reinforced full-width ramp provides a broad loading surface instead of three individual wheel ramps, giving you more room to guide your eTrike during loading and unloading. The ramp folds upright for travel and can also be removed when needed. More Than an eTrike Rack The large platform can also be used to transport cargo and other bulky items that fit within the carrier's size and weight limits. Built-In Features That Matter IronLoK™ Anti-Wobble System — A built-in stabilizer designed to reduce movement at the hitch connection for a tighter, more secure fit. IronShield™ Coating System — E-coating combined with powder coating for improved corrosion resistance and long-lasting protection. Full-Width Folding Ramp — A reinforced loading ramp provides a wide surface for easier roll-on and roll-off loading. The ramp can also be removed when needed. Integrated LED Lighting — Running lights, brake lights and turn signals help keep the rear of your vehicle and rack visible. Four Integrated Tie-Down Points — Welded anchor points provide convenient locations for securing your eTrike or cargo. 2" Hitch Connection — Designed for compatible 2" Class III or higher receiver hitches. Always verify your vehicle and receiver's tongue-weight capacity before use. Preorder Bonuses Current preorders include: 2 FREE EasyRatch Self-Retracting Ratchet Straps with Protective Sleeves — Designed to make securing your eTrike easier while helping protect painted surfaces. FREE Hitch Pin Hole Finder Tool — Helps align the rack's hitch-pin hole with the receiver's pin hole, making installation of a heavy rack easier.

Buy Now

eTrike Hitch Rack - PRO HD 36-70

$799.00 $1,199.00

Sale

Out of Stock

Built for Bigger eTrikes. The Pro HD 36-70 was designed for eTrike owners who need more room and more flexibility…Built for Bigger eTrikes. The Pro HD 36-70 was designed for eTrike owners who need more room and more flexibility than a traditional platform rack provides. Its 36" wide × 70" long platform accommodates a wide range of small, medium and large eTrikes. Unlike racks with an upright folding ramp, the Pro HD 36-70 uses three fully detachable ramps. Once your eTrike is loaded, the ramps are removed, allowing tires, baskets, lights and other parts of the trike to extend beyond the front or rear of the platform when needed. More Than an eTrike Rack The large platform and 200-lb weight capacity give you additional carrying options. Depending on the size and combined weight of your load, the Pro HD 36-70 can be used to carry: One small, medium or large eTrike One eTrike plus one eBike Two smaller eTrikes Cargo, mobility devices and other bulky items within the carrier's size and weight limits Built-In Features That Matter IronLoK™ Anti-Wobble System — A built-in stabilizer designed to reduce movement at the hitch connection for a tighter, more secure fit. IronShield™ Coating System — E-coating combined with powder coating for improved corrosion resistance and long-lasting protection. Three Detachable Loading Ramps — High-sided individual ramps provide a guided path for each wheel and remove completely after loading. Integrated LED Lighting — Running lights, brake lights and turn signals help keep the rear of your vehicle and rack visible. Four Integrated Tie-Down Points — Welded anchor points provide convenient locations for securing your eTrike or cargo. 2" Hitch Connection — Designed for compatible 2" receiver hitches. Always verify your vehicle and receiver's tongue-weight capacity before use. Preorder Bonus Current preorders include two FREE EasyRatch self-retracting ratchet straps with protective sleeves, designed to make securing your eTrike easier while helping protect painted surfaces.

Buy Now