A full-width loading ramp gives you more room to guide all three wheels onto the rack—making loading your eTrike feel easier, more controlled and more confident.
Verify Your eTrike Weight
Full-Width Platform Rack
More Room for All Three Wheels
Conditions apply
More Ramp. More Confidence.
The Pro HD 34-75 combines a large platform with a full-width loading ramp, giving you more room to guide all three wheels as you roll your eTrike onto and off the rack.
Designed for small, medium and large eTrikes that fit within the rack's size and weight limits, the Pro HD 34-75 provides a convenient way to take your eTrike beyond your neighborhood and explore more places.
The reinforced full-width ramp provides a broad loading surface instead of three individual wheel ramps, giving you more room to guide your eTrike during loading and unloading.
The ramp folds upright for travel and can also be removed when needed.
The large platform can also be used to transport cargo and other bulky items that fit within the carrier's size and weight limits.
IronLoK™ Anti-Wobble System — A built-in stabilizer designed to reduce movement at the hitch connection for a tighter, more secure fit.
IronShield™ Coating System — E-coating combined with powder coating for improved corrosion resistance and long-lasting protection.
Full-Width Folding Ramp — A reinforced loading ramp provides a wide surface for easier roll-on and roll-off loading. The ramp can also be removed when needed.
Integrated LED Lighting — Running lights, brake lights and turn signals help keep the rear of your vehicle and rack visible.
Four Integrated Tie-Down Points — Welded anchor points provide convenient locations for securing your eTrike or cargo.
2" Hitch Connection — Designed for compatible 2" Class III or higher receiver hitches. Always verify your vehicle and receiver's tongue-weight capacity before use.
Current preorders include:
2 FREE EasyRatch Self-Retracting Ratchet Straps with Protective Sleeves — Designed to make securing your eTrike easier while helping protect painted surfaces.
FREE Hitch Pin Hole Finder Tool — Helps align the rack's hitch-pin hole with the receiver's pin hole, making installation of a heavy rack easier.
Your Pro HD 34-75 includes:
The Pro HD 34-75 is designed to fit a wide range of eTrikes, including many larger models.
✓ Weight — Your loaded eTrike must weigh 200 lbs. or less. Remember to account for batteries, baskets and accessories that will remain on the trike during transport.
✓ Size — The rack platform measures 34" wide × 75" long. Because the full-width ramp folds upright during transport, your eTrike must fit within the usable platform area without tires, baskets, lights or other components interfering with the upright ramp.
Popular eTrike brands our customers own include:
Lectric • Mooncool • Velotric • Addmotor • Puckipuppy • Meet One • SixThreeZero • and many more.
Important: Brand alone does not determine fit. Dimensions and weights vary by model and configuration. Always verify the measurements and loaded weight of your specific eTrike before ordering.
The Pro HD 34-75 has inside dimensions of 34" wide × 75" long and a 200-lb. weight capacity. It is designed to carry one small, medium or large eTrike, or two smaller eTrikes when their combined size and weight are within the rack's limits. The full-width folding ramp provides a wide, continuous surface for loading and unloading your eTrike. Because the ramp folds upright for travel, proper fit is important. Watch the video and follow the three simple steps below to verify your eTrike's measurements before ordering.
Measure your eTrike from front to back, starting at the front tire approximately 4" above the ground. Measure from that point to the furthest point at the rear. If it measures 75" or less, it fits lengthwise.
If your eTrike measures more than 75" long, turn the front wheel sideways and measure from the furthest point on the front tire to the furthest point at the rear of the eTrike. If this measurement is 75" or less, it fits.
Measure from the outside of one tire to the outside of the opposite tire. Do not include axle bolts, fenders or other components that can extend beyond the tires. If the tire-to-tire width is 33½" or less, it fits within the rack.
The full-width folding ramp gives you a wide, continuous surface to roll your eTrike on and off the platform—no need to line up three individual wheels with separate ramps.
Integrated LED running, brake and turn-signal lights help keep the rear of your rack visible on the road.
Use the 34" × 75" platform for cargo, mobility devices, store purchases and other bulky items within the rack's size and weight limits.
A heavy rack needs a solid connection.IronLoK™ is built directly into the rack's hitch stem and applies internal pressure against the receiver to help reduce movement, wobble and rattle. Tighten the system, add the included lock, and you're ready for a more stable connection on the road.
Built for the miles ahead.IronShield™ combines an e-coat base layer with a durable powder-coated finish to provide enhanced protection against rust, corrosion, weather and everyday road exposure.
| WHAT TO LOOK FOR | Others | PRO HD 34-75 |
|---|---|---|
| Built for eTrikes | ||
| Includes Lights | ||
| IronLoK Anti-Wobble System Built-In | ||
| Protected with IronShield Coating | ||
| Includes Ramp For Easy Loading/Unloading | ||
| Two Easy Self Retracting Ratchet Straps | ||
| Four Tiedown Anchor Points | ||
| Includes Hitch Hole Finder Tool | ||
| Rack Lift Dolly System Compatible |
The Pro HD 36-70 extends approximately 58" from the rear of the vehicle to the farthest point of the rack. Keep this additional length in mind when turning, backing up and maneuvering in tight spaces.
Overhang requirements vary by location. Check applicable state and local requirements for flags, markers, lighting or other requirements before traveling.
With the rack installed, your vehicle is approximately 58" longer at the rear. Standard parking spaces may not always provide enough room, especially with an eTrike loaded. Look for pull-through spaces, end spaces or other locations that provide additional clearance when possible.
Why does Hitch-Rack Pro rate its platform carrier at 200 lbs. when some racks advertise 500 lbs.? Learn how leverage, road forces, hitch limitations, and uneven e-trike weight distribution affect a carrier's real-world capacity.
Full Article
Why buy a hitch carrier that can only do one job? See how a platform-style e-trike carrier can transport your trike while also providing useful cargo space for camping gear, coolers, luggage, tools, and more.
Full Article
Will your e-trike fit the rack? Learn the key measurements to take before buying and why racks with detachable ramps and folding ramps require different approaches to determining proper fit.
Full Article
